NEXDIAG – Medidor de Espessura STANDARD
99,90€
Description
Basic version of the paint thickness gauge NexPTG, which enables quick, accurate and intuitive vehicle testing. The meter features a System of Paint Coating Analysis (SAPL), which makes it easier to detect defects in the coating.
NexPTG Standard
Find out more about the painting before you buy it.
Paint thickness gauge with a flat probe, Bluetooth and the NexPTG app. A handy tool for assessing the paintwork on a second-hand car on flat body panels.
0–1000 µm · 300 measurements · flat probe

How does it work?
Three steps to check the paintwork
The app displays the measurements and helps you interpret differences in thickness between panels.
1. Connect the meter to your mobile phone
Open the NexPTG app and establish a Bluetooth connection.
2. Place it against the bodywork and measure
Check the flat areas of the bonnet, doors, mudguards and boot, keeping the probe perpendicular to the surface.
3. Refer to the SAPL interpretation
View the readings for each measurement and compare the different panels. A difference in thickness may indicate that the paintwork has been altered and warrant a more thorough inspection.

Application features
Everything you need to check your car
SAPL automatic classification
The app interprets the results and provides guidance on the thickness of the coating.
Bluetooth – no cables
Take the measurements using the device and view the results on your mobile phone.
History of 300 measurements
Save the results, including the date and time, so you can refer to them later and compare vehicles.
Statistics and comparison
Check the minimum, maximum and average values to identify differences between measurements.
Offline operation
Once you have completed the initial setup, you can take measurements without needing an internet connection or Wi-Fi.
App in Portuguese
SAPL menus and descriptions in Portuguese, with support for Android and iOS.
Who is it for?
Practical advice on buying a second-hand car
For buyers, enthusiasts and small businesses that carry out occasional inspections and do not require PDF reports.
Buyers of second-hand cars
Compare the vehicle paintwork offered by garages, adverts or private sellers before making a decision.
Family and friends
Help anyone who’s thinking of buying a car by checking the measurements saved in the app.
Small businesses
An option for occasional vehicle valuations when purchasing or trading in a vehicle.
Car enthusiasts
Check for variations in paint thickness on your own car and keep track of any paintwork repairs.

Flat probe
Stable contact on flat surfaces
The flat probe requires firm contact at a right angle to the surface. It is suitable for taking measurements on flat areas of the bonnet, roof, doors and other panels.
- Compatible surfaces: steel, galvanised steel and aluminium
- Up to 10 measurements per second
- 10 µm resolution
To take measurements on curved surfaces and in areas where the flat probe cannot make proper contact, the NexPTG Standard Plus features a spherical probe.
It measures the total thickness of the coating on the metal; it does not isolate the varnish layer nor does it measure directly on plastic.
Comparison
Standard vs. Advanced vs. Pro Carbon
NexPTG Standard
For buyers
NexPTG Advanced
For professionals
NexPTG Carbon
For experts
SAPL Analysis
SAPL Basics – the application helps you to interpret
The system interprets the readings in µm and provides a simple classification. The ranges below are indicative and are not a substitute for an assessment of the vehicle and the reference panels.
The layer is too thin
Reduced thickness, which may warrant checking the condition of the coating.
Typically 0–69 µm
Original painting reference
Values that are compatible with the reference used by the application.
Typically 70–165 µm
Second coat of paint
The part may need to be touched up or repainted.
Typically 166–300 µm
Thin layer of dough
This may indicate a repair involving the application of filler.
Typically 301–500 µm
Thick layer of dough
It may indicate a more significant alteration to the element.
Typically 501–700 µm
A very thick layer of dough
Recommendation to investigate the history and current status of the repairs.
Typically over 700 µm
Measurement history
Every car is recorded in the history
Go back to your previous readings and compare the vehicles you have looked at.
- 300 records stored locally on your mobile phone
- Date and time associated with the measurements
- SAPL classification for each record
- Consultation available offline
The Standard version does not generate PDF reports. For professional documentation with reports, choose the Advanced, Professional or Carbon version.

Technical specification
Meter parameters
Questions and answers
Frequently asked questions
Does Standard generate PDF reports?
No. This version saves the measurement history within the app, but does not generate PDF reports.
Does it measure on curved surfaces?
No. The Standard model uses a flat probe and should be used on flat surfaces, ensuring firm, perpendicular contact. For curved surfaces, choose the Standard Plus model with a spherical probe.
Does the app need an internet connection?
The measurements work offline. On first start-up, the manufacturer recommends connecting to the internet to download the necessary data.
Can I use it before buying a car?
Yes. It allows you to compare paint thickness and identify any differences that might warrant a more thorough inspection.
Does it only measure the varnish layer?
No. It measures the total thickness of the coating layers on the compatible metal substrate.
Does it fit plastic bumpers?
No. Suitable surfaces are steel, galvanised steel and aluminium.


What’s included in the set?
Contents of the pack
- NexPTG Standard meter with flat probe
- Calibration plates
- Set of alkaline batteries
- Instruction manual
Compatible with the NexPTG app for Android and iOS.
| Weight | 1 kg |
|---|

Reviews
There are no reviews yet