Tar & Glue Remover Pro 500ml

16,95€ 14,41€

RRCustoms
What Our Clients Say
4.89 rating (1637 reviews)
🎃 𝓗𝓐𝓛𝓛𝓞𝓦𝓔𝓔𝓝 15 % 👻
🎃 𝓗𝓐𝓛𝓛𝓞𝓦𝓔𝓔𝓝 15 % 👻

Description

An extremely powerful formula, designed for the rapid removal of heavy tar contaminants, stains and traces of asphalt.

Deliveries from 24 hours

Genuine Product

With the supplier’s guarantee

Support

Pre- and after-sales

Reviews (5)
Q & A
Description

An extremely powerful cleaner, designed for the rapid removal of the most stubborn tar contaminants, stains and traces of asphalt, as well as sun-cured adhesive from painted and glass surfaces. The cleaner easily dissolves oil and grease stains. It will also remove silicones, waxes and rubber stuck to the surface. The product reacts immediately to tar contamination; this reaction is evident as a characteristic dripping of dissolved tar particles, which appear dark brown in colour. It is particularly recommended for cleaning the car before polishing or waxing, and as one of the “removal” stages when stripping ceramic coatings. Avoid direct exposure to sunlight. The product is intended for professional use.

How to use:

  • Remove the so-called “Road film” using Trafic Film Remover (if necessary),
  • Rinse with pressurised water,
  • Remove ferrous particles using Iron Remover (if necessary),
  • Rinse with a high-pressure water jet and wash the car thoroughly with car shampoo,
  • Apply the product to a clean, dry surface using the attached sprayer,
  • Leave the agent on the item until a reaction occurs; do not let it dry out,
  • Work on small areas,
  • Work the product into the surface using a soft microfibre cloth or a soft brush in hard-to-reach areas, taking care not to let it dry out,
  • Rinse with pressurised water and wash the car thoroughly with car shampoo to remove any product residue,
  • If necessary, repeat the last four steps.

 

Recommendations:

The product must be used with care, particularly on car colour-change films, PPF films and headlamps, as the solution may leave a white residue on them. Before using the product on plastics, test the preparation on an inconspicuous area. To avoid damaging the spray bottle, rinse it thoroughly with plenty of water immediately after each use to remove any accumulated preparation. Do not use the product in direct sunlight or on hot surfaces. Before use, check the effect of the product on an inconspicuous area. Do not use the product on single-component paintwork (high-gloss finish)!

Additional information
Weight0,6 kg
Q & A

Q & A

Ask a question
You must be logged in to answer a question Log In
There are no questions yet