Heavy Cut Polishing Paste 250gr

It enables the removal of almost all paint defects, even on the most challenging paint finishes. The use of solid abrasives in the compound ensures that its full cutting potential is utilised on all types of paintwork.
The compound contains no silicone or powder, making it suitable for use in professional detailing workshops. The cutting power can be adjusted depending on the pad used.
We recommend BADBOYS PADS for the best possible finish. Designed for use with all types of polishing machines.
The paste’s special formula minimises dust and significantly improves the machine’s performance.

Instructions for use:

• Shake the bottle before use
• Apply the appropriate amount of paste to the polishing pad.
• Use the machine to spread the paste over the varnish at low speed, working in small sections.
• He works with footage cut into short clips, carefully adjusting the machine’s speed and pressure. .
• Keep a close eye on the temperature of the paint to ensure it does not overheat.
• Work with moderate pressure until the characteristic polishing marks appear on the paintwork.
• Remove any remaining polishing paste with a soft microfibre cloth.
• Check the effects of the correction using an inspection tool, such as the Wiper Panel.
• Repeat if necessary.
• Check the area with an inspection torch.
• To achieve the greatest possible shine, you need to follow these steps until you achieve the best possible finish on the varnish.

Recommendations:

• Shake before use.
• Make sure the work surface is cool.
• Clean the polishing pads regularly.
• Do not allow it to freeze. .
• Store in a cool, dry place at 15–25 ℃.
• Product for professional use.
• Wear eye protection, protective clothing, face protection and protective gloves. .
• Keep out of the reach of children.
• Keep the bottle tightly closed after use.
• Please read the instructions before use.

To achieve a perfect finish, we recommend an additional polishing step using a gloss paste (for example, One Step Polishing Paste).